Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera Don't miss
Best Value & More satisfactory for Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera reviews!
Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera many purchasers was gave reviews and ratings to Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera.
List Price : $173.99
Price on September 14, 2012 : Too low to display
Product Description
This kit includes a nightvision-capable rear view camera and clip-on rear view mirror for your vehicle. The camera installs easily above your license plate and outputs crystal clear video over an RCA jack. The monitor clips to your rear view mirror. The monitor detects when you back up and shows the camera on screen. When you put your car back in drive, the image disappears – and your mirror becomes a mirror again. Perfect for backing into tight spots or moving in reverse when visibility is limited – it’s like having an extra eye. And this model comes with nightvision LEDs, which illuminate the area behind you at night. This small and durable unit will keep you safe and secure because you’ll always know what’s going on around you. The mirror also has multiple video inputs so you can hook up a portable DVD player or iPod. There is a seam that runs around the body of the camera itself. That seam is marine coated, however in environments that vary in temperature greatly, the plastic can contract and let in water. We suggest using clear silicone to go around that seam approximately 0.25" in width. This covers the expansion and contraction of the plastic body.
Features of Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera
- 7'' TFT (16:9)Wide Screen - Viewing Angle:U/D90° L/R120° - License Plate Mount
- Universal Clip on Existing Mirrors - Power Comsumption:6W - Anti Glare Mirror
- Wireless Remote Control - Auto Switch PAL/NTSC - Screen Dimensions: 10.19''W x4.25''H x 1.81''D
- Resolution:480xRGBx234 - Dual Video Input(DVD/CAMERA/GAME) - Camera Dimensions: 8.46'' W x1.29''H x 1.37''D
- Contrast Ratio:400 CD/M2 - Rearview Night Vision Camera
- 7-inch TFT LCD display
- Viewing Angle:U/D90° L/R120° - License Plate Mount; Universal Clip on Existing Mirrors - Power Comsumption:6W - Anti Glare Mirror
See More Description on Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera.
| 178 of 182 people found the following review helpful 74 of 77 people found the following review helpful Keith Jackson (Gainesville, Florida) - See all my reviews Amazon Verified Purchase I like the system. It is really cool backing up looking into the rear-view mirror and seeing everything behind the car. I feel like I can drive in reverse anywhere. I think it will really help when I am backing up my trailor. With that said, the instructions are worthless. Since they are, I will describe my installation here on a Honda Ody 2005:1. Find a 12V power adapter (kind you plug into cigarette lighter, they come with lots of electronics so you probably have one somewhere. If not it can be purchased at RShack)/ 2. Cut off the plug end that goes into the electronic item (not the end that goes into the cig lighter). 3. Splice the cut wires into the Pyle Monitor's wires (the red is power and the black is ground). On my 12V adapter, the black wire was ground and the black-with-white-stripe wire was hot. 4. I did not use the green wire and will explain later. 5. The only other wire is the yellow video connector which we will use later. For... Read more 31 of 33 people found the following review helpful Amazon Verified Purchase This review is from: Pyle PLCM7200 7-Inch TFT Mirror Monitor with Rear-View Night Vision Camera (Electronics) I just purchased a 2010 F250 short bed. Did not get the reverse camera option and realized I should have. Looked around Amazom and found the Pyle PLCM 7200 monitor and camera for under $100. The reviews where mid range but it seemed to be only due to the complaint that the instructions are not adequate. Well it is true that they are very very limited but considering all the variations in vehicles it is expected. Basically you need power to the camera, cable run connecting the camera in the exterior back with the monitor in the cab, and power to the monitor. So this is what I had to do.Camera I did not want to hook it up to the license plate holder so some fool could rip it off easily. So a placed it just behind it. There is a panel with two holes. The holes are not in a perfect location but with a metal strip from Home Depot and some bolts, it sits secured and nicely hides between the gate and the license plate. I took a meter and checked continuity between the... Read more |
› See all 79 customer reviews...
*** Terms and Disclaimer *** CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com. Some content that appears on this site come from AMAZON Services LLC This content is provided 'as' and are subject to change or remove it at any time.
spy net binoculars where can you get coconut oil
No comments:
Post a Comment